Model |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pipe Size Range |
1/8"-1 1/2" |
1 1/4"-4" |
1 1/4"-4" |
2"-6" |
4"-12" |
8"-24" |
12"-36" |
| Optional Mandrels |
|
|
|
|
|
|
|
| Optional Head Kits |
|
|
|
|
|
|
|
| Optional Saddle Kits |
|
|
|
|
|
|
|
| Elbow Mandrel |
|
|
|
|
|
|
|
| Miter Mandrel |
|
|
|
|
|
|
|
| Sleeve Mandrel |
|
|
|
|
|
|
|
| ID Tracking Module |
|
|
|
|
|
|
|
| Flange Facing Mod. |
|
|
|
|
|
|
|
| Single Point Module |
|
|
|
|
|
|
|
| Pneumatic Drive |
|
|
|
|
|
|
|
| Electric Drive |
|
|
|
|
|
|
|
| HD Electric Drive |
|
|
|
|
|
|
|
| Hydraulic Drive |
|
|
|
|
|
|
|
| Absolute Min ID |
N/A |
.625"
15.88mm |
.625"
15.88mm |
1.625"
41.28mm |
3.44"
87.4mm |
8"
203.2mm |
11.38"
288.9mm |
| Absolute Max OD* |
2.0"
50.8mm |
4.5"
114.3mm |
4.5"
114.3mm |
6.625"
168.28mm |
24"
609.6mm |
42"
1066.8mm |
68"
1727mm |
 Standard  Special Order
* Maximum pipe size may refer to mounting range of machine configured with Single Point Module
• 1/4" to 2" cutting range
• Optional cutting heads
• Thin design for tube sheet cut-outs
• Adjustable clamping allows for correct centering
The lightweight, compact design and small diameter cutting heads of the Model 201BA BEVELMASTER permit rapid, accurate machining in tight spaces, making it perfect for boiler use. The OD mounting, (no mandrel) design clamps to the outside of tube or pipe allowing this machine to successfully work on boiler tubes with inside diameters under 1" with less damage than mandrel mounting systems. The machine features rapid clamping saddle adjustments and a right angle feed knob, with all controls (feed, clamp, motor) on the outside of the tube panel opening for safe and easy operation. The narrow width of only 1.45" permits use on waterwall cutout windows and operation between boiler panels. The Model 201BA's two adjustable saddles cover the full cutting size range.
• ID Mounting Range .77" (19.56 mm) to 1.95" (49.53 mm)
• Expanding mandrel provides fast, accurate self-centering alignment.
• Fast pneumatic clamping system.
• Patented lever feed system with depth stop.
• Torque accepting mandrel for operator safety.
• Mandrel shaft seal prevents contaminants from entering gears and internal parts.
• Hardened steel mounting blocks for maximum life and secure positioning.
• All tools needed for operation are included with the system.
The Model 202TS Tube Sheet Facer is an I.D. mounting machine tool for rapidly and reliably facing, squaring, and chamfering the ends of tubes and tube sheet bores in preparation for welding. This machine is a must-have for heat exchanger assembly and maintenance.
• 1 1/4" to 4" Pipe Range
• In-line Feed
• Flange Facing Attachment
• Optional Mounting Mandrels
Tri Tool's Model 204B BEVELMASTER features inline feed for general ease-of-use, a powerful 1.5HP motor and a versatile cutting head which accepts a wide variety of bits. The head is sealed to protect the inner components. The solid milled body has a heavy duty gear set and tapered roller bearings for reliability. A tool steel mandrel and durable hardened steel mounting blocks provide positive grip and the 1.5" feed length is perfect for deep counterboring and additional accessories.
• 1 1/4" to 4" Boiler tube
• Wedge Lock Bits
• Rugged Tool Steel Mandrel
• Mandrel Shaft Seal
• Ratchet Feed System
• 1.5 HP Drive Motor
The BOILERMASTER is specifically designed for boiler machining operations. The BOILERMASTER features right-angle feed for working in confined spaces, a powerful 1.5 HP motor and a compact cutting head which accepts standard and wedge-lock bits for heavy duty use. The head is sealed to protect inner components and the solid milled body houses a heavy duty gear set with tapered roller bearings for reliability. The tool steel mandrel and durable hardened steel mounting blocks provide maximum grip on water walls and boiler pipes making this machine the best choice for boiler construction and maintenance.
• 2" to 6" Pipe Range
• Bevel, Face & Counterbore
• Flange Facing
• Elbow and Miter Mandrels
• Sleeve Mandrel for Thin Wall
The extremely, rugged, powerful Model 206B has the features you want for dependable weld preps. The machine is rigid, light in weight, and features adjustable torque keys which compensate for wear, preventing slop and vibration and producing smoother cuts. Elbow mandrel, miter mandrel, and flange facing modules enhance machining capabilities. The holder design of the Model 206B allows for full viewing of machining operation, and facing, beveling and counterboring can be performed simultaneously. A 3HP motor and strong roller bearings make the Model 206B a true powerhouse.
• 4" to 12" Pipe Range
• Pneumatic, Hydraulic or Electric Drive
• With Single Point Module and proper mounting hardware (extends pipe range to 24")
• Form Tool or Carbide Insert Cutting
• Versatile Mounting Options
The Model 212B BEVELMASTER provides a wide working size range with a single standard mandrel. The open design of the tool holders allows for full viewing of machining operations for simultaneous facing, beveling and counterboring. Torque key adjustment on the mandrel prevents backlash and vibration, providing smoother cutting. A double enveloping worm gear set is used for maximum strength and machine life. The industry workhorse for machines in this class.
• 8"-24" Pipe Range
• With Single Point Module and proper mounting hardware (extends pipe range to 42")
• In -Line Pneumatic Drive
• Optional Hydraulic motor
• Quick -change dual speed gearbox
• Three integrated tooling arms for multiple machining operations
• Removable lifting frame for limited clearance operation
• Multiple position lifting ring for ease of handling
The extremely rugged and dependable Model 224B BEVELMASTER portable I.D. mount machine tool is ideal for beveling, facing and/or counterboring on larger pipe. The tool is configured with an in-line feed knob and two-speed pneumatic drive motor at a right angle to the lathe head. The Model 224B System comes complete with (3) tool holder assemblies, mandrel assemblies, mandrel head assemblies (3 jaws), upper lifting frame (floor stand available as an option), pneumatic motor assembly wrench kit and operators manual. This is the new standard of precision in larger diameter beveling.
• 12" to 36" Pipe Range
• Perform both Flange Facing and Single Point Machining with SP Module
• Rigid Form Tool or Single Point Machining
• ID Tracking Module
• Dual Drive
• Full-function Miter Mandrel available
The strong, stable Model 236B BEVELMASTER platform provides unique ID mounted machining capabilities for heavy duty weld preparation. An optional Single Point Module and proper mounting hardware extends pipe cutting range to 60" (1524mm) for 37.5 degree bevels and up to 68" (1724mm) for flange facing. The powerful ID mandrel shaft provides superior mounting strength and support which allows rapid set-up and a strong, torque-accepting grip. A gear reduction unit on the feed system and adjustable tool modules combine with handy in-line feed knobs for ease of use. Single or dual hydraulic motors with a rugged worm drive system provide maximum power for single point, form tool, and miter cutting. An optional ID tracking system provides precise weld preparation on out-of-round pipe. Maximum power and precision in an easy to operate machine.
|
Portable Right Angle Feed Beveling Machine