1/2" (A) Station | 1-1/4" (B) Station | 2" (C) Station | 3-1/2" (D) Station | 4-1/2" (E) Station

Ultra XT™ Tooling System 1/2”(A) Station

ULTRA XT™ Precision Tooling System - Designed to enhance any punching operation - Up to 110% extra punch grind life, equals an extra 0.118(3.00). Quick-change strippers. Quick length adjustment. Fully compatible with alternative systems. Internal lubrication within punch guide. External lubrication between guide and turret bore. Hardened guides to reduce turret bore wear. SLUG FREE® dies eliminate slug pulling.

Punch Point Range: 0.030(0.80) to 0.500(12.70)

Punches: high-speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. External lubrication grooves to allow fluid flow. Single point turned radii at base of punch point to improve strength. Exceptional dimensional accuracy combined with superior angularity and concentricity result in extended tool life. Available in two styles; Ultra XT with lubrication grooves and Ultra-Metric which is compatible with Original Style 1/2”(A) station punches.

Strippers:  relieved to allow 0.118(3.00) extra grind life. Recessed to allow collection of lubrication fluid. Quick-change mechanism to allow rapid tool change. Rounded edges to minimise sheet marking. Optional urethane stripper pads to eliminate sheet marking.

SLUG FREE® Dies: Highly wear resistant, chrome air hardened tool steel to balance hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to eliminate pip marks. Precision orientation with hardened external pin. Up to 0.118(3.00) grind life. Superior roundness and flatness with exceptional die strength.

Canister Assemblies: Quick length adjustment. Uniform spring pressure. Compatible with popular alternative tool systems. Available in two versions; Ultra XT designed to accept the Ultra XT standard punch with integral lubrication mechanism and Ultra-Metric which is compatible with Original Style 1/2”(A) station punches.

Guides - quick change mechanism, Internal and external lubrication to reduce friction. Hardened and ground to reduce ware. Three versions available:

• Rounds Only – one internal keyway and one external keyway for rounds only.
• Shape (0&90 Degree) - one internal keyway and two external keyways (set at 0 and 90 degrees) for rounds and shapes.
• Shape (0&45 Degree) - one internal keyway and two external keyways (set at 0 and 45 degrees) for rounds and shapes.

ULTRA XT™ Tooling System 1-1/4”(B) Station

ULTRA XT™ Precision Tooling System - Designed to enhance any punching operation - Up to 110% extra punch grind life, equals an extra 0.118(3.00). Quick-change strippers. Quick length adjustment. Internal lubrication within punch guide. External lubrication between guide and turret bore. Hardened guides to reduce turret bore wear. SLUG FREE® dies eliminate slug pulling.

Punch Point Range: 0.500(12.70) to 1.250(31.70)

Punches: high-speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. Exceptional dimensional accuracy for improved hole quality. External lubrication grooves to allow fluid flow. Single point turned radii at base of punch point to improve strength. Superior angularity and concentricity. Available in three styles; Ultra XT with lubrication grooves, Ultra-Metric which are compatible with Original Style 1-1/4”(B) station punches and Inch Style which are have a inch style thread.

Strippers:  relieved to allow 0.118(3.00) extra grind life. Recessed to allow collection of lubrication fluid. Quick-change mechanism to allow rapid tool change. Rounded edges to minimise sheet marking. Optional urethane stripper pads to eliminate sheet marking.

SLUG FREE® Dies: Highly wear resistant, chrome air hardened tool steel to balance hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to eliminate pip marks. Precision orientation with hardened external pin. Up to 0.118(3.00) grind life. Superior roundness and flatness with exceptional die strength.

Canister Assemblies: Quick length adjustment. Uniform spring pressure. Compatible with popular alternative tool systems. Available in three versions; Ultra XT designed to accept the Ultra XT standard punch with integral lubrication mechanism, Ultra-Metric which is compatible with Original Style 1-1/4”(B) station punches and Ultra-Inch Style which accepts with Inch Style punches mentioned above.

Guides - quick change mechanism, Internal and external lubrication to reduce friction. Hardened and ground to reduce ware. Three versions available:

• Rounds Only – one internal keyway and one external keyway for rounds only.
• Shape (0&90 Degree) - one internal keyway and two external keyways (set at 0 and 90 degrees) for rounds and shapes.
• Shape (0&45 Degree) - one internal keyway and two external keyways (set at 0 and 45 degrees) for rounds and shapes.

ULTRA XT™ Tooling System 2”(C) Station

ULTRA XT™ Precision Tooling System - Designed to enhance any punching operation. Original Thick Turret Strippers. Quick length adjustment. Internal lubrication within punch guide. External lubrication between guide and turret bore. Hardened guides to reduce turret bore wear. SLUG FREE® dies eliminate slug pulling.

Punch Point Range: 1.250(31.70) to 2.000(50.80)

Punches: high-speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. Exceptional dimensional accuracy and tool life. External lubrication grooves to allow fluid flow. Single point turned radii at base of punch point to improve strength. Superior angularity and concentricity.  Fully compatible with original style thick turret tooling.

Strippers: Fully OEM compatible. Close tolerance opening for superior piece part quality. Radiused face to easy installation and reduce sheet marking.

SLUG FREE® Dies: Highly wear resistant, chrome air hardened tool steel to balance hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to eliminate pip marks. Precision orientation keyway. Up to 0.118(3.00) grind life. Superior roundness and flatness with exceptional die strength.

Punch Guide Assembly – Quick length adjustment mechanism on the side of the guide allows the punch length to be adjusted without disassembly. Compatible with Original Thick Turret style strippers. Hardened and ground to reduce turret bore wear. Internal and external lubrication grooves to reduce friction. High performance disk springs to optimize stripping force throughout the service life of the machine.

ULTRA XT™ Tooling System 3-1/2”(D) Station

ULTRA XT™ Precision Tooling System - Designed to enhance any punching operation.Original Thick Turret strippers. Quick length adjustment. Internal lubrication within punch guide. External lubrication between guide and turret bore. Hardened guides to reduce turret bore wear. SLUG FREE® dies eliminate slug pulling.

Punch Point Range: 0.030(0.80) to 3.500(88.90)

Punches: high-speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. Exceptional dimensional accuracy and tool life. External lubrication grooves to allow fluid flow. Single point turned radii at base of punch point to improve strength. Superior angularity and concentricity.  Fully compatible with original style thick turret tooling.

Strippers: Fully OEM compatible. Close tolerance opening for superior piece part quality. Radiused face to easy installation and reduce sheet marking.

SLUG FREE® Dies: Highly wear resistant, chrome air hardened tool steel to balance hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to eliminate pip marks. Precision orientation keyway. Up to 0.118(3.00) grind life. Superior roundness and flatness with exceptional die strength.

Punch Guide Assembly – Quick length adjustment mechanism on the side of the guide allows the punch length to be adjusted without disassembly. Compatible with Original Thick Turret style strippers. Hardened and ground to reduce turret bore wear. Internal and external lubrication grooves to reduce friction. High performance disk springs to optimize stripping force throughout the service life of the machine.

ULTRA XT™ Tooling System 4-1/2”(E) Station

ULTRA XT™ Precision Tooling System - Designed to enhance any punching operation. Original Thick Turret strippers. Quick length adjustment. Internal lubrication within punch guide. External lubrication between guide and turret bore. Hardened guides to reduce turret bore wear. SLUG FREE® dies eliminate slug pulling.

Punch Point Range: 0.030(0.80) to 4.500(114.30)

Punches: high-speed tool steel for exceptional interval between regrinds. 1/4 degree back taper and near polished flanks to reduce friction and eliminate galling. Exceptional dimensional accuracy and tool life. External lubrication grooves to allow fluid flow. Single point turned radii at base of punch point to improve strength. Superior angularity and concentricity.  Fully compatible with original style thick turret tooling.

Strippers: Fully OEM compatible. Close tolerance opening for superior piece part quality. Radiused face to easy installation and reduce sheet marking.

SLUG FREE® Dies: Highly wear resistant, chrome air hardened tool steel to balance hardness and toughness. SLUG FREE® die geometry eliminates slug pulling. Uniform clearance radii in die corners to eliminate pip marks. Precision orientation keyway. Up to 0.118(3.00) grind life. Superior roundness and flatness with exceptional die strength.

Punch Guide Assembly – Quick length adjustment mechanism on the side of the guide allows the punch length to be adjusted without disassembly. Compatible with Original Thick Turret style strippers. Hardened and ground to reduce turret bore wear. Internal and external lubrication grooves to reduce friction. High performance disk springs to optimize stripping force throughout the service life of the machine.