AN2000

Make quick work of your light metal cutting needs. Weighing just 7 pounds, the nimble AMN offers precise pneumatic cutting at up to 60" per minute. Cuts up to 14 gauge C.R. mild steel and most grades of stainless to 16 gauge. 1 Horsepower, 90 PSI pneumatic motor. Cuts 60" per minute. 1" minimum cutting radius.

AN3500

NEW and IMPOROVED DESIGN over the HN, AN3000 nibbler. The bronze slider has been replaced by a heavy-duty roller bearing. The old bulky cast plunger has been replaced by a lighter yoke. These changes have resulted in smoother operation and better parts life. The plunger, die holder and punch have been completely re-designed: a screw-on punch retainer provides easy access to the punch. Replacing the punch is now a breeze, no more tedious aligning access holes and working inside the tool. Just unfasten two screws and pick out the punch from the external T-slot. The new style symmetrical-punch provides two cutting edges. When the first edge gets dull, just turn it around and get DOUBLE PUNCH LIFE. For better tool handling, the front handle with a comfortable non-flip rubber grip has been added. It also serves as an additional support when servicing the tool in an upside down position. The HN2 uses a 1-1/4 horsepower, 6 AMP electric motor that cuts 10 gauge C.R. mild steel and most grades of stainless to 12 gauge at 90" per minute, with a cutting radius of 6".

AN5000

The EHN Electric nibbler provides beefed-up cold cutting performance and portability. The 2 horsepower 15 AMP motor cuts C.R. mild steel to 3/16" and most grades of stainless to 10 gauge at a radius of 8".

AN5500

The MHN is a versatile performer that combines speed and power. Ideal for manufacturing, ship building and welding shops. Its compact design makes it easily portable for field applications and finishing work on the fly. The 2 horsepower 15 AMP motor cuts 1/4" C. R. mild steel and most grades of stainless to 3/16".

AN6000

Like its electric brother, model EHN, the AEHN is suited for use in fabrication shops, ship building and tool and die shops. The 100 PSI pneumatic motor cuts 3/16" C.R. mild steel and most grades of stainless to 10 gauge up to 40 to 45" per minute with a cutting radius of 8".

PN-1000

At home on intricate curves on flat or corrugated metal, one hand is all it takes to make perfect cuts every time. The variable speed, 90 PSI, pneumatic motor, cuts up to 2500 RPM. It will cut 18 gauge mild steel and most grades of stainless to 16 gauge at 40" per minute. It can make tight curves up to 5/8" raduis.