Akyapak manufactures 3 roller Hydraulic Plate Bending Machines with the capacity of bending from 2 mm to 100 mm in thickness and from 1000mm to 6000 mm in width / length.
Some of the features of Akyapak’s 3 roller Hydraulic Plate Bending machines are:
• Top roll and pinch roll hydraulically driven
• Up & down movements of the side rolls are hydraulically powered
• Drop-end (cover) controlling system to open and close from control panel
• Top roll tilts up
• Rolls are driven by 3 seperate hydraulic motors and gearbox (up to ø230 mm.)

The frames of the machines are of fabricated, welded steel construction. The roll shafts and the materials and bearings used in production are of good (European) quality. Also the torque limit of the machines is very high. Akyapak machines are designed using 3D CAD programmes and all calculations are carefully checked in the analyzing programme by experienced, specialist engineers before production is started. Machines are suitable for ’CE’ and all necessary electrical and hydraulic safety precautions are taken by Akyapak.

Spherical bearings are used for the rolls to minimize frictional resistance, which improves the capacity of the machines.

Optional accessories for easier bending are listed below:
• Cone bending device (standard)
• Induction hardened rolls (standard)
• Digital display for both side rollers (standard)
• Infinitively variable speed of rotation
• Side and central supporters for big sheet metal diameters
• Extended rolls
• Profile rolls
• Material feed table

STANDART EQUIPMENTS 
• Cone bending device.
• Induction hardened rolls.
• Digital display.
• Machine body is steel st-52 construction.
• All rollers mounted in bearing.
• Drop end controlled from control panel in order to release easily bended metal sheet and lifted upper rolls. (except machines with top roll diameter 160-190-210)
• Movement and parallelism adjustment of the rollers controlled from control panel.
• Rolls are driven by three seperate hydraulic motor and / or gearbox. (except machines with top roll diameter 160-190-210, bottom rolls are driven by seperate hydraulic motors)
• Electrical and hydraulic protection against overloads.
• Separate control panel. 
• Suitable for “CE” 

SPECIAL EQUIPMENTS
• Side and central supporters for big sheet metal diameters.
• Extended rolls.
• Profile rolls.
• Material feed table.
• Changeable top roll with smaller diameters.

AHK 3x20-25 mm