The Peddinghaus 1250 Straight Cut Series saw is the industry benchmark for Speed Sawing by incorporating a large 1250 x 810 mm (50 x 32 inch) capacity. By employing the technologies of one-touch operation, with Auto Feed Blade Feed compensation, the 1250 delivers the fastest processing times in the industry. The 1250 Straight Cut Series saw remains the perfect complement to the Peddinghaus BDL 1250 or PCD 1100 structural drill lines.
Versatile Band Saws
With the ability to process materials up to 30" (800 mm) wide × 23" (600 mm) tall, the Peddinghaus 800-600 proves to be one of the most versatile band saws in the Eco-Line roster.
Gripper Infeed System
The gripper infeed system on the 800-600 band saw creates opportunities where other saws come up short. This system gives the machine the ability to process round tube, as well as bundle multiple pieces of stock together - lowering process times and increasing productivity. The micro-mist coolant system allows materials to go straight from the cutting station to other processes without the need to clean materials.
Miniscule Material Drop
No matter the application, the 800-600 band saw provides accuracy and reliability every time. Its miniscule material drop provides for intricate cuts that accommodate any process your shop may demand. Length of remaining piece is less than 1 ½”.
PeddiCool Lubricant
PeddiCool is the environmentally friendly solution to flood coolant problems – no mess, and no contamination or disposal issues. Try some today!
PeddiCat Band Saw Blades
The superior design of the PeddiCat band saw blades by Peddinghaus increase blade longevity and extend your consumables budget. Massive 2 5/8” blade provides power and precise cuts.
Lift and Kneel
This device automatically lowers the entire saw bed below the passline when not cutting. This eliminates the tendency for material to drag across the saw bed when conveyed through the machine. Once the cut cycle is initiated, the saw raises to the material handling system passline for accurate cutting.
Hydraulic Feed Pressure System
This efficient system provides consistent removal of chips, and assures square cuts with a smooth material finish. An added benefit is the assurance of extended blade life.
3 Degree Attack Angle
A slight attack angle allows for reduced cut times, reduced blade wear, and less blade breakage. The non-productive cutting times are substantially decreased with a 3 degree blade attack when compared with competitive machines, which carry 9 degree angles.
Laser referencing
Laser reference point allows for easy manual positioning of cuts
CNC Control
Program parts with minimal material waste. All of the control functions for the saw are provided on an independent, freestanding remote control console. This console features a user-friendly touch screen CNC control. Parts programming and all of the saws functions are controlled by an easy-to-use interface.
The Peddinghaus 1250 Straight Cut Series saw is the industry benchmark for Speed Sawing by incorporating a large 1250 x 810 mm (50 x 32 inch) capacity. By employing the technologies of one-touch operation, with Auto Feed Blade Feed compensation, the 1250 delivers the fastest processing times in the industry. The 1250 Straight Cut Series saw remains the perfect complement to the Peddinghaus BDL 1250 or PCD 1100 structural drill lines.
