KD-270

These Kett scissor shears are similar to the KD-280 scissor shears. The KD-270 feature a stationary top blade. They are ideal for cutting a wide range of pliable materials such as: carpet,carpet underlayment, foam rubber, linoleum, vinyl, woven wood fabric, chip board, etc. The unique scissors action cuts light materials without fouling or gouging. Even handles heavy foil, light insulated wire, hardware cloth and mesh screening with ease. The large "Rabbit Ear" blades funnel thick, soft materials into the scissor jaws for a clean, flowing cut. This time and labor saving cutting shear weighs less than five pounds. The cutting blades are the finest A-2 tool steel, and can easily be replaced.

KD-280

The KD-280 features a stationary bottom blade. They are ideal for cutting a wide range of pliable materials such as: carpet,carpet underlayment, foam rubber, linoleum, vinyl, woven wood fabric, chip board, etc. The unique scissors action cuts light materials without fouling or gouging. Even hamdles heavy foil, light insulated wire, hardware cloth and mesh screening with ease. The large "Rabbit Ear" blades funnel thick, soft materials into the scissor jaws for a clean, flowing cut. This time and labor saving cutting shear weighs less than five pounds. The cutting blades are the finest A-2 tool steel, and can easily be replaced.

KD-290

Originally developed for dismantling telephone installations, the KD-290 Terminal Strip Shear saves valuable time and labor cutting the light gauge wires in terminal strips. The unique scissors action of the "duck-bill" blades cuts quickly without fouling or jamming. Made of the finest A-2 steel. The shear head rotates a full 360 degrees allowing the operator to set the blades at just the right angle for ease of operation. The KD-290 features a 5.5 AMP, 2500 RPM, single speed motor for fast and quiet cutting.

KD-441

With a powerful 5 amp motor and speeds up to 2500 strokes per minute, the KD-441 quickly cuts through plastics, wire mesh and rubber with a clean scissors action. When cutting thin coated metals, the swiping cut seals edges and is less likely to rust or corrode. Set the speed of these shears to suit your work.

P-1041

The Kett Heavy-Duty Scissor Shear has been specially designed for fast, accurate cutting of steel siding. You'll discover it also handles other hard-to-cut metal, plastic and rubber sheet materials without fouling or stalling. The unique swiping action of the scissor blades leaves a clean, sheared edge. The power unit, with variable speeds from 0 to 2200 RPM, is ideal when cutting through steel siding's multi-thickness nailing strip and continuing across the sheet and through the lip. The P-1041 also takes the work out of making square and difficult angle cuts following a scribed line. This Heavy-Duty-Scissor-Shears will cut wire mesh up to 18 gauge, soft plastic or rubber to 1/4" and rigid PVC and other plastics to 1/8" thick with power to spare. An excellent multi-use power hand tool for any specialty shop or manufacturer. Completely portable to go anywhere you do...in the shop or on the site. Variable speed power unit. Lightweight-weighs less than 5 pounds. Powerfull & versatile.

P-541

With a powerful 90 PSI pneumatic motor and speeds up to 2200 strokes per minute, the P-541 quickly cuts through plastics, wire mesh and rubber with a clean scissors action. When cutting thin coated metals, the swiping cut seals edges and is less likely to rust or corrode. Set the speed of these shears to suit your work.

P-570

These Kett pneumatic scissor shears are similar to the P-580 scissor shears. The P-570 features a stationary top blade. They are ideal for cutting a wide range of pliable materials such as: carpet,carpet underlayment, foam rubber, linoleum, vinyl, woven wood fabric, chip board, etc. The unique scissors action cuts light materials without fouling or gouging. Even hamdles heavy foil, light insulated wire, hardware cloth and mesh screening with ease. The large "Rabbit Ear" blades funnel thick, soft materials into the scissor jaws for a clean, flowing cut. This time and labor saving cutting shear weighs less than five pounds. The cutting blades are the finest A-2 tool steel, and can easily be replaced.

P-580

The P-580 Pneumatic Scissor Shears are ideally suited for cutting a wide range of pliable materials, carpet, carpet underlayment, foam rubber, linoleum, vinyl, woven wood fabric, etc. The unique scissors action cuts light materials without fouling or gouging. Even handles heavy foil, light insulated wire, hardware cloth and mesh screening with ease. The large "Rabbit Ear" blades funnel thick, soft materials into the scissor jaws for a clean, flowing cut.

P-1080

Small size and fast accurate action set this scissor shear apart from the competition. The P-1080 Pneumatic Scissor Shear features a straight-handled body design for great maneuverability. Requiring only a 90 PSI air source, this Kett shear easily cuts through pliable materials such as carpet, carpet underlayment, foam rubber, linoleum and vinyl. Only 12 inches long and weighing just 4 pounds, it is truly compact and portable.

P-1070

The P-1070 Pneumatic Scissor Shear features a straight-handled body design for great maneuverability and a top stationary blade. Requiring only a 90 PSI air source, this Kett shear easily cuts through pliable materials such as carpet, carpet underlayment, foam rubber, linoleum and vinyl. Only 12 inches long and weighing just 4 pounds, it is truly compact and portable.