KS-221

This light duty panel saw, equipped with a cast aluminum saw head, lets you cut plastic and other ridged materials up to 1/4", aluminum up to 1/8" and C.R. mild steel to 18 gauge. Lightweight and highly maneuverable, the saw is great for cutting gutters, aluminum siding, autobody panels, sign-making and model shop work. It leaves a milled, ready-to-fabricate finish without burning the metal. The KS-221 has a 2500 RPM, 5 amp electric motor.

KS-226

The KS-226 slits thin-walled metal-clad cable to aid in stripping, and can be used on either aluminum or steel armored cable. Its positive depth stop lets you just penetrate the sheath, protecting the insulated wires from damage. The saw also cuts panels, plastic adn other soft rigid materials up to 1/4" thick; aluminum up to 1/8"; and C.R. mild steel 16 gauge and lighter. The KS-226 has a 2500 RPM, 5 amp electric motor and a cast aluminum saw head.

KS-23AM

The KS-23AM allows you to cut any desired depth through soft, rigid sheets and panels from zero to full 3/8" depth with 2" diameter and 5/8" with 2 1/2" diameter high-speed steel saw blades. This saw handles C.R. mild steel to 16 gauge; aluminum to 3/16"; and plastics to 1/2". Cuts are smooth and straight, so edges do not need finishing. Powered by a "D" handle, heavy duty industrial type 3/8" capacity 5.5 amp electric motor and cast aluminum saw head, the KS-23AM can handle the toughest jobs in the shop or at the job site.

KS-25AM

This heavy-duty saw cuts C.R.mild steel up to 16 gauge; hard aluminum to 1/8" thick; and soft aluminum, brass, copper and lead to 3/16". The D-handle gives you the control to cut openings for louvers and lights in steal-clad doors. The saw also cuts plastic panels up to 3/8" thick. Powered by a "D" handle, heavy duty industrial type 3/8" capacity 5.5 amp electric motor and cast aluminum saw head, the KS-25AM can handle the toughest jobs in the shop or at the job site.

KS-423

Start where you please and cut to any desired depth up to 3/8" with 2" diameter blades. Or cut 5/8" deep with 2-1/2" diameter high-speed steel blades. Great for cutting laminate tops for sinks. Change to a 2" diameter metal cutting blade and cut up to 16 gauge C.R. mild steel. The saw head features a compact blade guard that follows a line with ease, cutting within 1/2' of wall or obstruction. The 2500 RPM, 5 amp variable speed motor has plenty of power for any job.

KS-426

The KS-426 slits thin-walled metal-clad cable to aid in stripping and can be used on either aluminum or steel armored cable. Its cast aluminum saw head features a positive depth-stop that lets you set the saw blade to just penetrate the sheath, protecting the insulated wires from damage. The variable-speed saw also cuts panels, plastic and other rigid materials up to `1/4" thick; aluminum up to 1/8"; and C.R. mild steel to 16 gauge and lighter. The 2500 RPM, 5 amp variable speed, electric motor has the power for any job.

KSV-33AM

Connect this master saws cast aluminum saw head to a canister-type or in-plant vacuum system to control dust when cutting fiberglass or other hazardous materials. The saw uses 2" and 2-1/2" diameter saw blades with adjustable cutting depths from 0 to 5/8" and comes complete with four blades and wrenches. It also cuts C.R. mild steel to 16 gauge; hard aluminum to 1/8"; and soft aluminum, brass and copper to 3/16".

KSV-432

The KSV-432 has a 2-1/2" carbide abrasive blade for fast cutting of drywall, fiberglass and plaster products with dust control. The cast aluminum saw head accepts the nose from your shop vacuum to collect debris as you cut. Great for close quarters where plunge or straight cut-outs are needed. Also accepts 2" and 2-1/2" high-speed steel blades for cutting C.R. mild steel up to 16 gauge or laminate panel cutting.

PS-521

Cuts plastic and rigid materials up to 1/4" thick; aluminum up to 1/8" thick; and C.R. mild steel to 18 gauge. Uses either 1-1/4" or 1-1/2" diameter high-speed steel saw blades. It is great for cutting gutters, aluminum siding, autobody panels and signs. It leaves a milled, ready to fabricate finish without burning the metal.

PS-523

The PS-523 perfectly compliments the full line of Kett Pneumatic Saws. A variable-speed trigger lets you make smooth, easy starting cuts in mild steel to 16 gauge. Using 2" or 2-1/2" high-speed steel saw blades, this highly maneuverable saw cuts through 5/8" thick panels without chipping or burring the edges.

PS-526

This versatile, durable saw safely cuts C.R. mild steel up to 16 gauge and aluminum to 1/8" thick. The full cutting depth for plastics is 5/16" with a 1-3/4" diameter blade or 3/8" with the 2" diameter blade. Just set the positive depth stop adjustment to determine the precise depth of cut.

PSV-532

The PSV-532 is a lightweight, efficient saw for cutting hazardous dust-producing materials. It comes equipped with a 2-1/2" carbide abrasive blade. The saw's vac head accepts many standard noses from canister-type or in-plant vacuum systems. It also accepts 2" or 2-1/2" high-speed steel blades for cutting metal or laminate panels.

KSV-434

Now you can cut heavy 5/8" drywall, fiberglass, plastic sheet and other construction panels and automatically vacuum up the dust as you cut. The Kett Vacuum Panel Saw features a cast aluminum vac saw head to connect to your shop vac or in-plant collection system. It features a spring-loaded blade guard and cuts up to 1-1/16" deep using a 3-1/2" carbide abrasive or high-speed steel saw blade. It also accepts 2-1/2" blades for cutting laminate panels or C.R. mild steel up to 16 gauge.

KSV-34AM

For heavy-duty, dust free cutting of fiberglass, plastics or hazardous dust-producing materials, this powerful 1500 RPM D-handled vac saw, with cast aluminum saw head, connects to your cannister-type or in-plant vacuum system. It uses a 3-1/2" diameter high-speed steel saw blade and provides adjustable cutting depths up to 1-1/16". You can start with a plunge cut in the middle of a panel and quickly cut C.R. mild steel up to 16 gauge, hard aluminum to 1/8", soft aluminum, brass and coper to 3/16" with a 2-1/2" diameter high-speed steel saw blade.

PSV-534

This lightweight, pneumatic saw is ideal for cutting drywall, backer-board, fiberglass and dust-producing panels. It easily makes plunge cuts or straight cuts up to 1-1/16" deep. The cutting zone is protected by a spring-loaded blade guard. It uses Kett's 3-1/2" diameter saw blades and also accepts the 2-1/2" diameter high-speed saw blades for cutting C.R. mild steel up to 16 gauge or laminate materials. The vac head accepts many standard noses from canister-type or in-plant vacuum systems.

KS-444

This versatile panel saw, equipped with a cast aluminum saw head, is ideal for cutting hardboard, plywood, siding and backer-board. Start out with a plunge cut, or straight cut up to 1-1/16" deep, using a Kett high-speed steel 3-1/2" circular saw blade protected by a spring-loaded blade guard. Smaller diameter 2-1/2" blades are also available to cut tougher materials. You can quickly cut aluminum up to 1/8", fiberglass, plastics and other rigid material. Powered by a 5.0 AMP, 2500 RPM motor, the KS-444 is well suited to a broad range of projects.

KS-44AM

For heavy-duty cutting up to 1-1/16" deep, this D-handle saw with a cast aluminum saw head gives you accurate depth control. Use it on plywood, plain or laminated hardboard, particle board and drywall panels. The 5.5 AMP motor with maximum 1500 RPM makes it the ideal saw in the shop or at the construction site. The D-handled gives steady two-handed control for accurate plunge cuts and fast, efficient straight-line cutting of panels of all sizes.

PS-544

For cutting drywall, plywood , laminate, hardboard or other soft or rigid materials up to 1-1/16" thick, the powerful PS-544 Pneumatic Panel Saw has no equal. It features a cast aluminum saw head and Kett 3-1/2" hardened high-speed saw blades protected by a spring-loaded retractable blade guard. This controlled depth-of-cut also makes it ideal for cutting signs, PVC, acrylic plastics and C.R. mild steel up to 16 gauge. Weighing only 5 lbs. and at 14 inches long, it lets you work in tight spaces without hand or arm fatigue.